Bilstein Performance Series Long Travel 50-75mm Lift Kit - Gen 2 Isuzu D-Max (2012-07/2020)

After Lots of R&D on our own in-house Colorado & Customer Vehicles, we are proud to release what we believe is the Best Quality True Long Travel Lift Kit for Isuzu D-Max & RG Colorado

We wanted to offer a few Big Gains with these kits as follows.

• A Genuine Big Gain in Flex.
   
• We achieved 7" of Overall Travel in the front end and 14" of Overall Travel in the rear end.
   
• We focused on Reliability of the vehicle.
  We didnt want to throw a big lift at it & have it break every time you go out 4WDing.
  With that in mind, we have set the ride heights and travel limits on this kit within working limits of the driveline & steering system.
   
• We have the Front on ours set up at approx 75mm Front Lift and 40mm Rear Lift which sits nicely on 33's as per our vehicle pictured, whilst still maintaining good weight transfer for braking performance.

We built this kit with the following:

• You get Longer Travel Front Struts & Rear Shocks, with Damping Rates Tuned to suit the Vehicle, with safe Droop Lengths keeping the Factory Rack and Tie Rod End Limitations in mind.
• Increased Flex Overall improves Off Road Capabilities & Improves Traction.
• The Kit uses Long Travel Upper Control Arms to Improve Articulation and add Extra Caster and Camber Correction.
• We have incorporated a Diff Drop Kit to improve CV Angles under all conditions.

The kit contains:

• 2x Blackhawk Long Travel Upper Control Arms.
• 2x Long Travel Bilstein B6 Offroad Front Custom Built Struts (Circlip Height Adjustable)
• 2x King Springs  Front Coil Springs
• 2x Heavy Duty Strut Top Mounts, including Pre-Assembly of Front Struts and Springs
• 2x Long Travel Bilstein B6 Offroad Rear Shock absorbers
• 2x EFS Leaf Springs
• 2x Greasable Shackles
• 2x Greasable Pins
• 4x Heavy Duty U-Bolts
• 1X Poly Bush Kit
• 1x Rear Brake Line Relocation Kit
• 1x Diff Drop Kit

This Kit is Designed to Fit:  

• Gen 2 Isuzu D-Max (2012-07/2020)

Note: Will only suit vehicles with 17" or larger wheels with no further backspacing than the factory wheels.

Clearance is very minimal with Colorado/DMax UCA’s. Make certain the ABS line is secured to the top or bottom of the arm—secured away from the coil spring and the wheel potentially turning in. 

Please allow up to 2 weeks lead time, as we Custom build this kit.