Bilstein 40-50mm Lift Kit - Ford Ranger PJ-PK (2006-2011)

Lift Kit for Ford Ranger PJ-PK (2006-2011)

The kit contains:

• 2x Bilstein B6 Offroad Front Shock Absorbers
• 2x Bilstein B6 Offroad Rear Shock absorbers
• 2x Rear Leaf Springs
• 1x HD Shackle Bush Kit
• 4x HD U-Bolts
• 1x Front Shock Tower Reinforcement Kit (Supplied at No Charge) .... This is a must on these to stop the Shock Tower tops breaking off the Chassis & many others do not even offer them in their kits.

Optional Extra's:

• 2x HD Front Torsion Bars - Required for Weight Bearing front end accessories

Suits:

• Ford Ranger PJ-PK 2.5L & 3.0L (2006-2011)

--

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessory weights.
• Estimated Lift Heights: Front approx 50mm - Rear Approx 40-50mm