Victron BlueSolar MPPT 100/50

BlueSolar Charge Controllers MPPT 100/50 12V/24V auto select battery voltage 50A rated charge current 700W @12V or 1400W @24V maximum PV power Automatic load disconnect 98% peak efficiency Reverse polarity (fuse) protection, output short circuit protection and over temperature protection   Ultrafast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F). Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Real-time data display options - Apple and Android smartphones, tablets and other devices: see the VE.Direct to Bluetooth Smart dongle - ColorControl panel   Victron Energy Support Links  Not sure what type of Solar Charge controller you need?Click the icon to read a helpful guide from Victron Energy called:Which solar charge controller: PWM or MPPT?                  Click here to access MPPT Sizing Calculator
Multi Chemistry Profiles Installed:All Victron MPPT's come standard with charge profiles for multiple chemistries, including Lithium, Lead and GEL, as well as the ability to program user defined profiles. The default setting for Victron Energy MPPT's is for Lead batteries, but charge profiles can be easily changed using the VictronConnect App. This BlueSolar MPPT will require a VE.Direct Bluetooth Smart Dongle, or a VE.Direct to USB Interface to access the VictronConnect App 
VictronConnect Compatible:VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built in, or are connected to a VE.Direct Bluetooth Smart Dongle, or a VE.Direct to USB InterfaceFind out more about VictronConnect here, or download the App via these links. Click here to download the VictronConnect Manual