Caloffroad 50-75mm Bilstein Lift Kit - Toyota Hilux 3.0L Diesel (2005-2015)

For over 50 years Bilstein have been the leaders in Monotube Shock Absorber technology. Each Bilstein Platinum Series shock absorber is assembled by hand in Germany, and the Platinum Series Offroad shocks are designed and tested in Australia, to suit the harsh conditons that Australia throws at them. 

The front struts are circlip height adjustable and can offer a 2" or 3" ride height!

This is a complete Caloffroad Bilstein lift kit for the 2005-2015 Toyota Hilux 4WD (Vigo) 3.0L Diesel 

The kit contains:

• 2x Caloffroad Bilstein Front Shock Absorbers Pre-Assembled with COR Platinum Comfort Tapered Springs & New Strut Mounts
• 2x Caloffroad Bilstein Rear Shock Absorbers
• 2x Raised Leaf Springs
• 4x HD U Bolts
• 1x Polyurethane Bush Kit (Leaf Spring)

--

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.
• If ordering kit for 3" Front Lift, UCA's will be required to achiever proper Wheel Alignment
• Diff Drop Kit is Strongly recommended for 3" Lift.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories. 
• Estimated Front Lift Height 50mm or 75mm 
• Estimated Rear Lift Height 45-50mm or 75mm
• Check with your relevant State Authorities for legalities of lifts above 50mm