Caloffroad Bilstein 75mm Platinum Lift Kit - V8 Landcruiser 79 Series Single Cab 2007-09/2016 Pre DPF Models

This is a Complete 3" Caloffroad Bilstein Platuinum Lift Kit to suit Toyota Landcruiser 78, 79 Series (2007-On) excluding some vehicles as per notes listed below.

For over 50 years Bilstein have been the leaders in Monotube Shock Absorber technology.

Each Bilstein Platinum Series shock absorber is assembled by hand in Germany, and the Platinum Series Offroad shocks are designed and tested in Australia, to suit the harsh conditons that Australia throws at them.

This Kit Contains all components required to perform a 3" Lift

The kit contains:

• 2x Caloffroad Bilstein Long Travel Front Shock Absorbers
• 2x Caloffroad Platinum Series Front Coil springs
• 2x Caloffroad Bilstein Long Travel Rear Shock Absorbers
• 2x Leaf Springs
• 1x ABS Wire Relocation Kit
• 1x Brake Proportioning Valve Spacer Block
• 4x HD U Bolts
• 1x Polyurethane Bush Kit
• 1x Swaybar Spacer Kit
• 1x Adjustable Panhard Rod
• 1x Caster Correction Bush Kit
• 1x Greasable Pin Kit
• 1x Greasable Shackle Kit

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.