Dobinsons 75mm 3" Long Travel Monotube MRR Lift Kit - Nissan Navara NP300 Coil Rear 05/2015-11/2020 Series 1-4

This is a True Long Travel Kit to suit Nissan Navara NP300 Coil Rear 05/2015-11/2020 Series 1-4

The Dobinsons MRR lift kit is the ultimate in lift kits for your 4WD. It combines the known quality of Dobinsons components with the performance of a Monotube Remote Reservoir 50mm bore shock and is height adjustable, meaning you can fine tune your ride height to your desired look, or to increase lost height when new accessories have been fitted

This is a complete Dobinsons Monotube MRR lift kit for a Nissan Navara NP300 with coil rear suspension

The kit contains:

• 2x Dobinsons Long Travel MRR Front Shock absorbers
• 2x Dobinsons Front Coil Springs 
• 2x Blackhawk or CalOffroad Fixed UCA's (Same Arms, Different Box)
• or Optional Dobinsons Billet Adjustable Long Travel Upper Control Arms
• 2x Dobinsons Long Travel MRR Rear Shock absorbers
• 2x Dobinsons Rear Coil Springs
• 2x Adjustable Rear Swaybar Links
• 1x 2-4" Adjustable Headlight Alignment Bracket Kit

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories. 
• Front Lift Height approx 3" 75mm
• Rear Lift Height approx 2" 50mm
• For Series 3 onwards the Rear End already sits higher than the earlier models so lift is approx 20-30mm in Rear.