Dobinsons Monotube IMS 30mm Front Lift Kit - MQ & MR Triton (04/2015-On)

Featuring all the same features as the Dobinsons MRR Front Lift Kit minus the remote reservoir, The Dobinsons MT IFP lift kit is great for those who don't need a remote reservoir, or don't want to have the hassle of mounting the reservoir. It combines the known quality of Dobinsons components with the performance of a Monotube 50mm bore shock and is height adjustable, meaning you can fine tune your ride height to your desired look, or to increase lost height when new accessories have been fitted

This is a Dobinsons Monotube IMS Front Lift Kit for a Mitsubishi Triton MQ & MR (04-2015-On)

The kit contains:

• 2x Dobinsons MIMS Adjustable Front Struts
• 2x Dobinsons Front Coil Springs

--

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.
• Estimated Lift Height 30mm.......
• This is a genuine estimation of lift heights achievable for this Model & anyone that advertises a kit for an MQ or MR Triton as a 2" Lift kit is full of cr*p, as the front end geometry will just not allow a full 50mm 2" lift to work and still have any downtravel left on these without UCA's & a Diff Drop Kit.
• Triton's have Limited Downtravel in Suspension (Droop)  When Raised & a Shortened Upper Bumpstop Kit to Maximise Travel is Strongly Recommended.