Dobinsons Monotube IMS 40mm Lift Kit - LDV T60 (2017-On)

Featuring all the same features as the Dobinsons MRR lift kit minus the remote reservoir, The Dobinsons Monotube IMS lift kit is great for those who don't need a remote reservoir, or don't want to have the hassle of mounting the reservoir. It combines the known quality of Dobinsons components with the performance of a Monotube 50mm bore shock and is height adjustable, meaning you can fine tune your ride height to your desired look, or to increase lost height when new accessories have been fitted

This is a complete Dobinsons Monotube IMS lift kit for a LDV T60 (2017-On)

The kit contains:

• 2x Dobinsons IMS Adjustable Front Shock absorbers 
• 2x Dobinsons Front Coil Springs
• 2x Dobinsons IMS Rear Shock absorbers
• 2x Dobinsons Raised Leaf Springs
• 4x U Bolts
• 1x Polyurethane Leaf Spring Bush Kit
• 1x Headlight Levelling Bracket

--

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories. 
• Estimated Lift Height: Front 40-45mm  Rear 40-45mm