Dobinsons MRR 3" 75mm Lift Kit - Suits Toyota Landcruiser 78 Series Troop Carrier 4.5L V8 Diesel 2023-On Facelifted Models

Important Notes Before Ordering this Kit: 

• As the latest generation Toyota Landcruiser 70 series have been released with Autonomous Emergency Braking (AEB), this has resulted in additional Radars and Sensors that will require calibration after lifting.
• Please be aware that vehicles raised more than 50mm, and particularly those with larger Tyres fitted, the Radar sensors will require Recalibration.
• This must be performed by a Toyota Dealer After the Lift (and Tyres if fitting larger tyres) have been fitted, at the owners expense.
• Some Customers have reported that Toyota have done this for around the $300.00 mark, but this is not a guaranteed price, just a guide.

This is a complete Dobinsons MRR 75MM lift kit for a Toyota Landcruiser 78 Series Troop Carrier 4.5L V8 Diesel 2023 Facelifted Models.

The kit contains:

• 2x Dobinsons 60mm Bore Monotube Remote Reservoir Front Shock Absorbers
• 2x Dobinsons 75mm Front Coil Springs
• 2x Dobinsons 60mm Bore Monotube Remote Reservoir Rear Shock absorbers
• 2x Dobinsons 75mm Leaf Springs
• 1x Dobinsons Brake Proportioning Valve Adjuster
• 4x HD U Bolts
• 1x Polyurethane Bush Kit
• 1x ABS Line Spacer Kit
• 1x Front Adjustable Panhard Rod
• 1x Castor Correction Bush Kit
• 2x Rear Greasable Pins
• 2x Rear Greasable Shackles
• 1x Dobinsons Steering Damper
• 1x Front Sway Bar Extension Kit

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories. 
• Estimated Lift Height 75mm 3"

MRR Information:

With serious 4WD owners now pushing their vehicles through harder, harsher terrain with more accessories fitted to their 4×4’s than ever before Dobinsons saw the need for a no compromise, performance engineered shock absorber that offers the ultimate in performance. After years of research, development Dobinsons Produced and have continued to evolve the Monotube Remote Reservoir shock absorbers.

The MRR series has been produced from the highest quality components available and has been built to a quality standard, not a price. The time, expense and expertise that Dobinsons have invested into producing the MRR series has resulted in a shock absorber of superior quality that will provide the ultimate in performance, handling and vehicle comfort no matter what you throw at them.

Featuring a high performance inverted Monotube shock design, 60mm bore, 22mm piston rod and remote reservoir technology, the Dobinsons MRR lift kit is what your 79 series 'Cruiser needs to tackle heavy corrugations and high weight loads.