Dobinsons Nitro Gas 30-35mm Lift Kit - LWB Suzuki Vitara (1991-1998)

Dobinsons Spring & Suspension established in 1953, is largely based on Leaf and Coil Spring Manufacturing and the supply of Suspension Components. With several generations of family ownership and experiences, Dobinsons has become one of the leaders in the Spring Industry in Australia applying the years of knowledge into their products. 

This is a complete Dobinsons Nitro Gas lift kit for a Suzuki Vitara LWB Gen 1 (1988-1998)

The kit contains:

• 2x Dobinsons Nitro Gas Front Struts
• 2x Dobinsons Raised Front Coil Springs 
• 2x Dobinsons Nitro Gas Rear Shock absorbers
• 2x Dobinsons Raised Rear Coil Springs

Optional Extra's: 

• It is Recommended that a Camber Adjustment Kit is Fitted to help with front Wheel Alignment when vehicle is Raised.

Note:

• Estimated Lift Height is approx 30-35mm & is the max recommended for this model due to Front End Geometry issues above these heights.
• Please note that there is no HD Front Coil Option for 2.5L Engine Models. Front Coils are to suit no Accessories only for the 2.5L Models.

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.