Dobinsons Nitro Gas 40-45mm Lift Kit - Mitsubishi Triton ML/MN 2006-03/2015

Dobinsons Spring & Suspension established in 1953, is largely based on Leaf and Coil Spring Manufacturing and the supply of Suspension Components.

With several generations of family ownership and experiences, Dobinsons has become one of the leaders in the Suspension Industry in Australia applying the years of knowledge into their products. 

This is a complete Dobinsons Nitro Gas lift kit for a Mitsubishi Triton ML/MN 4WD

The kit contains:

• 2x Dobinsons Nitro Gas Front Shock absorbers
• 2x Dobinsons Raised Front Coil Springs 
• 2x Dobinsons Nitro Gas Rear Shock absorbers
• 2x Dobinsons Raised Leaf Springs
• 4x HD U Bolts
• 1x Leaf Spring Bush Kit

Note: Due to Geometry limitations in the design of this model they are left with limited downtravel in the Front Suspension when raised.

It is strongly recommended to also purchase the Shortened Upper Bumpstop Kit with this lift to maximise and improve front suspension travel for the Front Suspension

Important Notes for setting up your Vehicle Correctly:

• Shortened Upper Bumpstop Kit is strongly recommended for this kit to maximise the limited front suspension travel.
• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.