Dobinsons Nitro Gas 50mm Front Lift Kit - Ford Everest UA2 06/2018-04/2022

Dobinsons Twin-Tube Nitro Gas shock absorbers are designed, developed and tested in Australia to ensure that every shock can withstand the blistering heat and endless corrugations of the Australian Outback. 

Dobinsons Nitro Gas feature:

• 51mm Body Size w/ a Double-Chromed 18mm Piston Rod
• High-Quality Fuchs Oil
• Teflon Piston Rings
• Genuine NOK Seals
• Dust Boot For Added Protection
• Vehicle & Weight specific Valving
• Natural Rubber Bushes
• Direct Bolt On (No Mods Required)

This is a Dobinsons Nitro Gas 50mm Front Lift Kit to suit:

• Ford Everest UA2 06/2018-04/2022

The kit contains:

• 2x Dobinsons Nitro Gas Front Struts
• 2x Dobinsons Front Coil Springs
• 2x Heavy Duty Strut Top Mounts

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• If you don't already have them, the Dobinsons Swaybar Links must be used with long travel struts to ensure the Swaybar does not foul.
• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.