Bilstein 40mm Lift Kit - Holden Rodeo R7 & R9 (03/1998--2002)

Important Notes for setting up your Vehicle Correctly:

When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.

Do Not include “Future Planned Mods” into your weight calculations if they are not fitted to the vehicle.

Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.

Do not put “Occasional” Loads into your "Constant" Load determinations.

Selecting a load rating that is too heavy for your setup will result in Poor Flex Offroad, Very Rough Ride, Compromised suspension Travel, and will cause damage to your new Shock Absorbers and other components by pushing them outside of their intended range & Void the Warranty on them.

If you are in any Doubt, Please click on the link below on how to setup your suspension correctly

            https://www.autopartsco.com.au/blog/blog/how-to-set-up-your-suspension-correctly/

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories. 
• Estimated Lift Height 40-45mm