Fenix Full Alloy Performance Radiator - Gen 3 Isuzu D-Max 08/2020-On, Gen 2 Isuzu MU-X 08/2021-On 3RD Gen Mazda BT-50 09/2020-On

Upgrade your Cooling Capacity on your current model 4JJ3 Isuzu/Mazda

The Radiators in the current 4JJ3  Isuzu/Mazda platform are ok in most situations, but become marginal when pushed with decent towing loads.

An upgraded Radiator is already included as a part of GCM upgrade kits on these models due to this.

The Fenix All Alloy radiator uses a high density alloy core like the OE Radiator.

The OE Radiator has a 26mm thick core.

The Upgraded Fenix Radiator takes that core size to 36mm thick.

This adds a great increase in cooling capacity of around 35% over the OE unit.

Comes as a Radiator with Drain Plug and a new Radiator Cap.

NOTE:

If you order the Radiator Without Sidebands & reutilise your factory plastic side mounting bands off the factory radiator for installation, they will require a simple mod of slightly filing the plastic of a couple of mm only in a small area eaither side to clear the wider welds at the bottom tank of this radiator.