ProVent Oil Catch Can & Fuel Manager Kits - Isuzu D-Max RG, Gen 2 MU-X & Gen 3 Mazda BT50 all with 4JJ3 3.0L Engines

Genuine Mann+Hummel ProVent oil separator kits protect your modern diesel engine by sustainably reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.

The problem is compounded with modern engines fitted with exhaust gas recirculation systems (EGR) where by a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the oil collects the exhaust particles. The combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance or failure.

By not fitting a Mann+Hummel ProVent system, it is likely that your engine will experience a progressive reduction in performance. The images below are typical examples of the build-up in engines not fitted with a Mann+Hummel ProVent system.

Mann+Hummel ProVent systems, are specifically designed for its ability to separate and redirect oil and air from blow-by gas produced from within the crank case. The Mann+Hummel ProVent system also provides the option of returning the oil back to the sump.

For the ultimate defence against oil and soot contamination, investing in a Mann+Hummel ProVent oil separator kit will protect your investment 24 hours a day, 365 days a year.

Also Included in this is Fuel Manager Fuel/Water Separator Kit

Contaminated fuel can lead to vehicle downtime and costly repairs, especially to expensive common rail systems and components. Modern engines are increasingly requiring better fuel filtration technology to ensure delivery of the cleanest fuel to your vehicle's fuel system.

This Fuel Water Separator kit will not cause flow restriction as it is capable of 114 lph of fuel flow.

This Kit Mounts up behind the Passengers Headlight in the LH front corner of the engine bay & uses multiple pick up points to share the load.

Sold as a complete kit with all hardware included, this catch can kit is an essential part for your 4WD

Kit Contains

Provent Kit:

• Genuine Mann+Hummel ProVent Oil Separator
• Model Specific Laser Cut Stainless Steel Bracket
• Hose Kit w/ Reducers
• Assorted nuts, bolts & Clamps
• Installation Instructions

.

Fuel Manager Kit:

• 1x Fuel Filtration Unit Fuel Manager (Filters down to 30 Microns !)
• Mounting Bolts, washers & nuts
• Quality Fuel hose
• Specially Designed Filter Mounting Bracket
• Straight fittings
• Blanking Plugs
• Hose Clamps
• Thread Paste Sealant (6ml Tube)
• Fittings to suit
• WF Filter Removal Tool

NOTE: Install all fittings and plugs with the thread paste

This oil separator and fuel manager combo kit is designed to fit:

• Isuzu D-Max RG 08/2020-on with 3.0L TD 4Cyl 4JJ3 Engine
• Gen 3 Mazda BT50 09/2020-on with 3.0L TD 4Cyl 4JJ3 Engine
• Gen 2 Isuzu MU-X 08/2021-On with 3.0L TD 4Cyl 4JJ3 Engine

By fitting an oil catch can, you will avoid the harmful carbon build up in your intake manifold as seen below.