Victron Phoenix 12v Inverter - Suit Starlink Rectangular Dish & V3 Flat Dish

Specified to exceed the power requirements for the Starlink Rectangular & V3 Flat dish, this Victron Phoenix Inverter is the perfect addition to your Starlink dish in your Boat, Caravan, Car or Camper Trailer. 

We have tested a number of inverters (including the smaller 12/250 Victron inverter) and have found this 12/375 to be the most suitable for the application. Smaller inverters (such as the 12/250) do not have the capacity to handle the Starlink unit's peak capacity, which is delivered on startup for 1-2 minutes and has been known to cut out using a smaller, or lesser quality inverter. This Victron 12/375 has been tested extensively with the Starlink Rectangular dish and has worked flawlessly, including using the snow melt function. 

The Victron Phoenix Smart inverter is fully configurable, ensuring it will cut off before draining your batteries too low and damaging them. 

Unlike the clunky 12v conversions for Starlink on the market that require cutting and crimping of your components and void your Starlink warranty, the addition of this Inverter will not affect your warranty and is as simple as supplying positive and negative 12v power, and then plugging your Starlink router in. No modifications required! 

Features:

VE.Direct communication port
The VE.Direct port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Output voltage 210 - 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level

Monitoring:
• In- and output voltage, % load and alarms

Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power
Essential for the startup of the Starlink Rectangular Dish 

ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby, the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery positive and the left hand contact of the two pole connector.
 

Please note, this inverter will not work with the new High Performance and Flat High Performance starlink dishes.