Whiteline Front Control Arm Upper Arm - Ford Ranger PX I 4WD 2011-2015

Whiteline boasts a worldwide reputation as a leading manufacturer of replacement, enhancement and performance suspension components that deliver ignificant gains in handling & performance. Whiteline's 4WD range now boasts a growing range of heavy duty suspension solutions to enhance your 4WD both on and off road.

A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch.

Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height.

Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.

Kits Required: 1

Warranty: 3 Year / 60,000 Km's

Kit Contents: 2 Arms, Install Guide

Install Guide: Download Here

Kit Suits: Ford 2011-2015 Ranger PX I 4WD

Important Notes: Performance arms - fixed offset alignment correction arms - a must for raised vehicles